Reliance Water Controls Heatguard DC153 TMV3 Approved Thermostatic Showers
RWC – Reliance Water Controls Heatguard DC153 TMV3 Approved Thermostatic Showers
TMV3 and WRAS Approved Thermostatic Showers Suitable for Healthcare Applications
Reliance Water Controls Heatguard DC153 is a TMV3 approved thermostatic shower suitable for healthcare applications. The Heatguard DC153 has two separate controls for flow and temperature which can be accurately set by the user.
RWC’s Heatguard DC153 have been designed to suit large internal flow paths to provide greater flow flow at low pressure and the unit incorporates pushfit connections on the inlet.
The outlet can be fitted either to the top or the bottom to suit installation requirements and can be removed and reversed to allow either a compression of flat faced fitting to be used.
The Heatguard DC153 shower is fitted with serviceable strainers and a one-piece thermostatic cartridge to allow quick and easy maintenance and replacement if required.
RWC’s Heatguard DC153 showers are WRAS and TMV3 approved and comply with BS 7942 regulations and the NHS MES D08.
| Part Ref | Description |
|---|---|
| THRM 153 011 | Heatguard DC153 Exposed Chrome Thermostatic Shower |
| THRM 153 021 | Heatguard DC153 Exposed Chrome Thermostatic Shower with Lever Handles |
| Body | Cast Brass |
|---|---|
| Seals | NBR |
| Strainer | Stainless Steel |
| Cartridge Body | Brass |
| Finish | Chrome |
| Hot Water Supply Temp Range | 50-85ºC |
| Recommended Hot Water Supply Temp Range | 55-60ºC |
| Cold Water Supply Temp Range | 5-25ºC |
| Minimum Temperature Differential | 10ºC |
| Factory Set Temperature | 38ºC +/- 2ºC |
| Static Pressure | 10 bar max |
| Operating Pressure | 0.2 to 5.0 bar |
| Flow Rate | 8L per minute (Regulated) |
| Maximum Pressure Loss Ratio | 10:1 (Either Supply) Note – Optimum performance achieved with equal pressure. |
