JAM provides a wide range of sensors and detectors to be used within the Aqualarm leak detection alarm systems to provide monitoring for water, oil, refrigerant gas leak detection as well as overflow and liquid level montoring and changes to temperature and humidity.
CD-X water leak detection cable is provided in 1, 2, 5 and 10m lengths and comes pre-terminated with male and female locking line plug and socket so lengths of cable can be linked together within a leak detection zone.
The FLi-24 liquid level detector can be secured in place within a tank or other vessel to provide an alarm if liquid rises above or drops below a preset level.
JAM's HDi-24 humidity detector monitors for changes in the level of humidity and an alarm is triggered if the humidity level drops or rises above a preset point set by the client.
The Aqualarm IRDi-24 oil leak sensor provides point of use detection for oil leaks. In the event of oil being detected an alarm signal is sent to the designated control panel.
The OFDi-24 sensor provides overflow leak detection using stainless steel sensing probes which can be inserted into a main overflow pipe to sense water passing through.
JAM's RGi-xx-24 range of refrigerant gas detectors are able to monitor for a selection of gases and will provide an alarm signal if gas levels rise above threshold levels set by the client.
The STDi-24 provides point of use detection for water leaks using a sensing module which provides an alarm signal in the event of a leak.
The Aqualarm TDi-24 monitors for changes in temperature and in the event of the temperature dropping below the low level or above the high level set by the client, an alarm signal will be sent to the corresponding alarm panel.