HFY EXHEAT Flanged Industrial Immersion Heaters

EXHEAT HFY Flanged Industrial Immersion Heaters

Flanged Immersion Heater for Hot Water Cylinders and Process Tank Heating Applications

EXHEAT's HFY range of flanged immersion heaters are designed for all tank heating applications where the contents are non-corrosive to the immersion heater material. Typical Applications include calorifier packages, hot water storage tanks, boiler equipment, cleaning and rinsing equipment.

The HFY immersion heater has individually replaceable corrosion resistant Incoloy 825 heating elements which are secured to either a brass or stainless steel mounting flange as requested and has a heavy duty weatherproof terminal enclosure rated IP54.

HFY immersion heaters are nominally designed for 415V but can used on 380V - 440V electrical supplies, other voltages are available on request if required. HFY heater units are fitted with an adjustable control thermostat and a 'Run Dry' over-temperature protection thermostat as standard.

HFY Flanged Industrial Immersion Heaters Product Range
Part Number Load KW 380V 3PH Load KW 415V 3PH Load KW 440V 3PH Immersed Length
HFY 1216 10.1KW 12KW 13.5KW 405mm
HFY 1223 10.1KW 12KW 13.5KW 584mm
HFY 1816 15.1KW 18KW 20.2KW 405mm
HFY 1823 15.1KW 18KW 20.2KW 584mm
HFY 2416 20.1KW 24KW 27KW 405mm
HFY 2423 20.1KW 24KW 27KW 584mm
HFY 3027 30.2KW 36KW 40.5KW 685mm
HFY 4527 37.7KW 45KW 50.6KW 685mm
HFY 5436 45.3KW 54KW 60.7KW 915mm

 

HFY Flanged Industrial Immersion Heater - EXHEAT Technical Specification
Enclosure

Heavy gauge, corrosion protected, Mild Steel having a hinged access door and two undrilled removable gland plates for cable entry.

 

Finished in a grey stove enamel.

Flange Brass or Stainless Steel having 8 bolt holes, 10mm diameter on 146mm PCD
Heating Elements

Nickel Chrome resistance wire compacted in high purity Magnesium Oxide insulating powder and sheathed in corrosion resistant Incoloy.

 

Each element is secured to the flange by screwed compression fixings, making them individually replaceable.

Controls A capillary type control thermostat and a manual reset thermostat are fitted as standard
Working Pressure The maximum allowable working pressure is 6 bar.g (87 psi g)
Thermostat Pockets Two stainless steel pockets are secured into the flange by screwed compression fittings, one of which is thermally linked to the uppermost element
Supply Voltage

Standard units are nominally designed for 415V, and are suitable for operation on 380V - 440V electrical supplies.


Other voltages and alternative wiring configurations available on request.

 

HFY EXHEAT Flanged Industrial Immersion Heaters
UK Time - GMT:

HFY EXHEAT Flanged Industrial Immersion Heaters
HFY EXHEAT Flanged Industrial Immersion Heaters

Heat Tracing - Thorne & Derrick