Isopad's FIBDR-SRB base drum heater provides medium flow and process temperature for Zone 1 & Zone 2 hazardous areas.
The Isopad FIBDR-SRB base drum heater provides heat to the drum via a self regulating trace heating cable embedded within a solid aluminium plate to ensure the maximum in safety at operating conditions.
Isopad FIBDR-SRB base drum heater is ideal for use with other drum heating equipment such as jackets or enclosures to prevent heat loss through the bottom of the container.
The Isopad base drum heater provides evenly distributed heat through the aluminium plate and an electro-mechanical thermostat regulates the operating temperature.
The framework of the FIBDR-SRB base drum heater is constructed from solid steel and comes with castors for easy transportation.
Part Number | Certification | Height | Outer Diameter | Nominal Power | Nominal Voltage | Weight |
---|---|---|---|---|---|---|
FIBDR-SRB | ATEX & IECEx T6 | 78mm | 546mm | 530W | 230V | 20kg |
Heater Construction | Type - Self-regulating heating cable
Carrier - Aluminium plate, anodised black Outer Protection - Sheet SteelThermal Insulation Material - Mineral-fibre 50mm thick Paint - Structured blue paint |
---|---|
Connection | Lead - 2m Silicone insulated, 2.5mm² cross section
Maximum Operating Temperature - 180ºC |
Temperature Control | Thermostat Type - RAYSTAT-EX-03
Sensor Type - PT100 2-wire Controller Range 0ºC to 499ºCMaximum Ambient Temperature - -50ºC to +55ºC Ingress Protection - IP66 Housing Material - Polyester glass-fibre reinforced |
Technical Data | Frequency - 50-60 Hz
Maximum Operating Voltage - 254VAC Single Phase Maximum Operating Temperature - 65ºC to 120ºC (depending on heating cable type and temperature class) |
Certification | System approval by Baseefa
ATEX & IECEx Certified EX II 2 G / D Ex e iam IIC T2 to T6Ex tD A21 IP66 T80ºC to T240ºC EN & IEC StandardSuitable for Zone 1 & Zone 2 (Gas) and Zone 21 & Zone 22 (Dust) Electrical Protection Class I Ambient Temperature Range - -40ºC to +50ºC |