Empteezy Steel Gas Cylinder Stores

Empteezy Steel Gas Cylinder Stores

Relocatable Gas Cylinder Storage Units

Empteezy provide gas cylinder stores and can be colour coded to suit the gases you are storing to ensure simple identification if you have numerous gases and need to ensure correct segregration.

All models are fitted with fork pockets to aid unloading and location on site and all models (excluding the CT2LP) are fitted with retaining straps or chains.

Empteezy CT1 Gas Cylinder Store

The CT1 gas cylinder store is mainly used for internal use and can store up to 8 large cylinders. The CT1 is all steel with a RHS frame, heavy duty back plate and fold down front which acts as a loaded ramp. The fold down front can also be padlocked to deter unauthorised movement of individual cylinders.

The unit is shot blasted before being painted and has heavy duty pockets and cylinder restraining straps to make it easy to move using a forklift or pallet truck.

Empteezy CT2 Gas Cylinder Store

The CT2 gas cylinder store is suitable for both indoor and outdoor use and is enclosed on three sides and roofed and can store up to 8 large gas cylinders.

The CT2 gas cylinder store is constructed from steel and has an RHS frame and mesh door which is extremely safe and secure. 

The base is set on plinths to reduce corrosion issues and the unit has a lockable ramp which aids security when closed. The unit is shot blasted before being painted.

Empteezy CT2LP Gas Cylinder Store

The CT2LP is built to the same specification as the CT2 but is fitted with a shelf suitable for up to 12 smaller cylinders or bottles. The CT2LP is constructed on a 4mm mild steel base with fork pockets and has a built-in 5mm chequer plate ramp.

The RHS corner posts hold the centre shelf and the rear sloping roof has been fitted with a front rain gutter. The CT2LP is designed to hold LPG cylinders or similar and the unit is shot blasted before being painted.

Empteezy GB30 Gas Cylinder Store

The GB30 can hold up to 27 gas cylinders in compartments fitted with securing chains and has twin hinged mesh doors which are lockable allowing you to control who has access. 

The base of this gas cylinder store is 3mm mild steel sheet, with RHS cross members and pressed ribs. The corner posts and mains rails are from rolled hollow section and the back and side panels are 2mm mild steel sheet, corrugated where needed.

The sloping roof has been fitted with bracing and fully welded around the perimeter. The unit has crane-lifting points with a maximum gross weight of 2000 kilos, base plinths and a separate ramp to aid loading and unloading.

To finish the unit has been shot blasted and painted to approximately 100 microns.

Empteezy Steel Gas Cylinder Stores - Product Range
Part Ref

Dimensions

(Length x Width x Height)

Cylinder Quantity & Size Tare Weight
CT1 1280mm x 780mm x 920mm 8 x 285mmØ (Vertical) 100kg
CT2 1280mm x 780mm x 2200mm 8 x 285mmØ 168kg
CT2LP 6 x 11kg per level 180kg
GB30 3000mm x 1500mm x 2256mm 27 x 285mmØ 550kg

 

Empteezy Steel Gas Cylinder Stores
Empteezy Steel Gas Cylinder Stores
Empteezy Steel Gas Cylinder Stores
UK Time - GMT:

Empteezy Steel Gas Cylinder Stores
Empteezy Steel Gas Cylinder Stores

Heat Tracing - Thorne & Derrick