Eltherm EX-Box LED Hazardous Area Temperature Controller

EX-Box LED Hazardous Area Temperature Controller for Heated Hoses

Hazardous Area Heated Hose Temperature Controller

Eltherm’s EX-Box LED digital thermostat is developed to be used within ATEX hazardous areas for heated hose applications.

The EX-Box LED is very similar to the EX-Box DIS however the LED thermostat does not come with a PC bus-card, instead the LED has an interface and 8.2V 100mA supply.

The LED interface indicates as follows:

  • Green – Power connected, no heating
  • Orange – Power connected, heating on
  • Red Blinking – Alarm or fault, power connected
  • Red – Severe fault or power disconnected

The EX-Box LED can be used either separately as a controller or limiter, or as a controller-limiter combination and is housed in a IP65 enclosure.

Eltherm EX-Box LED Technical Data
Certificate IBExU 04 ATEX 1165X
Classification

II 2G Ex emb [ib] IIC T4

II 2D Ex tD A21 IP65 T100ºC

Housing Dimensions

170mm x 130mm x 140mm (W x H x D)

Dimensions include cooling device & mounting bracket

Housing Material Aluminium
IP Rating IP65
Ambient Temperature -32ºC to +60ºC
Cable Entrances 2 x M20, 1 x M25
Supply Voltage 230V +/- 10%
Power Supply 230V / 16A, 2-pole
Alarm Output Optically separated 100mA
Bus Card Intrinsically Safe for Ex-Control
Measurement Entrance PT100 2/3 core, intrinsically safe
Measurement Range -40ºC to +300ºC
Control Range Over Entire Measurement Range
Control Characteristics Dual Mode Controller
Weight Approx 3.5kg (without mounting bracket)

 

Eltherm EX-Box LED Hazardous Area Temperature Controller
UK Time - GMT:

Eltherm EX-Box LED Hazardous Area Temperature Controller
Eltherm EX-Box LED Hazardous Area Temperature Controller

Heat Tracing - Thorne & Derrick