Chromalox FPFR Hazardous Area Water Immersion Heaters - Withdrawable Elements & ANSI Flanges

Chromalox FPFR Hazardous Area Water Immersion Heaters - Withdrawable Elements & ANSI Flanges

Industrial Water Immersion Heater Suitable for Hazardous Area Applications - ATEX II 2 G Ex de II C T1 to T6 Certified

The Chromalox FPFR water immersion heater is designed for use within Zone 1 & Zone 2 hazardous area applications and is constructed with a stood off painted cast iron terminal enclosure, stainless steel sheathed elements in a stainless steel pocket and a 2.5" 150lb ANSI carbon steel flange available.

FPFR water immersion heaters have a watt density of 3.9W per cm² and withdrawable heating elements which allow for elements to be replaced with minimum down time and no need to drain down the system.

The ATEX hazardous area water immersion heater has a built in pocket for an optional sensor, thermostat or cutout and is suitable for ambient temperatures from -50ºC to +40ºC (or +60ºC with a longer stand off).

Chromalox FPFR Hazardous Area Water Immersion Heaters - Withdrawable Elements & ANSI Flanges - Product Range
Part Number Power Output Length Cold Length Weight
FPFR 00303/25 3000W 675mm 85mm 6kg
FPFR 00503/25 5000W 970mm 8kg
FPFR 00703/25 7000W 1340mm 9kg
FPFR 00903/25 9000W 1610mm 10kg
Note - Add the requested temperature class (T1, T2, T3, T4, T5 or T6) at the end of the reference

 

Chromalox FPFR Hazardous Area Water Immersion Heaters - Withdrawable Elements & ANSI Flanges
UK Time - GMT:

Chromalox FPFR Hazardous Area Water Immersion Heaters - Withdrawable Elements & ANSI Flanges
Chromalox FPFR Hazardous Area Water Immersion Heaters - Withdrawable Elements & ANSI Flanges

Heat Tracing - Thorne & Derrick