Aquilar Aquitron AT-LDM Leak Detection Module

Aquilar Aquitron AT-LDM Leak Detection Module

Low Cost Leak Detection System for Vend Areas, Tea Points & Kitchens

Aquilar's Aquitron AT-LDM Leak Detection Module allows for leak sensing of small applications such as Vend Areas, Tea Points, Kitchens and Drip Trays as a low cost option. The maximum length of leak sensing cable with a AT-LDM module is 45m and a combination of any 10 Aquitron probes.

In the event of a leak being detected the AT-LDM Leak Detection Module provides a visual indication as standard. An audible alarm is available as an option.

The AT-LDM Leak Detection Module is available for 24V AC/DC and 230VAC.

Aquitron AT-LDM - Aquilar Leak Detection Module Technical Specification
Sensing Cable Compatibility All TraceTek adapted sensing cable (TT1000, 3000, 5000, 5001, 7000)
Detection Probes Water detection probes, optical oil sensors, float switches and immersion sensors
Maximum Length of Sensing Cable

45 metres (150ft)

Combination of any 10 AquiTron probes

Enclosed Version Polycarbonate; smoked transparent lid, base & grey base; IP66
Operating Conditions (PCB) -10ºC to +50ºC, 0% to 90%, non-condensing
Power Supply Two versions: 24V AC/DC & 230VAC (AC 50/60Hz)
Power Consumption 50mA at 24V AC/DC and 11mA at 230VAC
Relay Output Volt free relay contacts activated by leak SPDT (NC/COM & NO)
Relay Rating 5A at 250VAC/24 VDC
Status LED

Power (Green), Leak (Red)

Audible Alarm 85dB 10cm (where fitted)
Dimensions

Open Chassis: 77mm x 112mm x 45mm

Enclosed: 130mm x 130mm x 75mm

Weight

Open Chassis: 82g - 24V Version, 248g - 230V Version

Enclosed: 660g

Approvals

Electromagnetic compatibility (EMC)

CE Marked

 

UK Time - GMT:

Aquilar Aquitron AT-LDM Leak Detection Module
Aquilar Aquitron AT-LDM Leak Detection Module

Heat Tracing - Thorne & Derrick