Andel PPL BundGuard - Automatic Oil & Water Separating Pump System

Andel PPL BundGuard - Automatic Oil & Water Separating Pump System

Andel's BundGuard system is specifically designed to face water removal problems at substation sites and protect the environment and the operator of the site.

Any tank, drum or plant containing more than 200 litres of oil must be provided with some form of secondary containment or bund to retain leaks and spills. By law the bund must be capable of holding at leasts 110% of the contents of the main oil tank.

Large oil storage tanks and equipment such as electricity transformers may contain several thousand litres of oil and are also likely to be open to the elements. The bund will gradually collect rainwater and in time, the holding capacity of the bund can be significantly reduced.

As oil floats on water, once the capacity drops below 100% there is a risk of oil overflowing over the bund wall in the event of tank failure.

Andel's PPL BundGuard is a cost-effective, self-contained and easy to fit automatic pump and alarm unit which monitors and works around the clock.

The BundGuard system uses advanced circuitry and micro control technology to keep oil within the container and expel water from the containment area.

The BundGuard has a robust stainless steel pump and sensor unit located within the sump. The control unit activates the pump as required to remove only clean water safe to foul sewer or interceptor depending on the sites circumstances.

Andel's BundGuard system has a number of failsafe systems in place and a range of visual and relay alarm outputs to ensure safety and allow for communication to remote monitoring systems. 

The PPL BundGuard removes the need for regularly emptying the bund by waste contractors thereby reducing costs, the environmental impact and carbon footprint.

Andel PPL BundGuard - Automatic Oil & Water Separating Pump System - Technical Specification
Control Panel
Power 110/230 VAC, 440W (Total including pump)
Construction Stainless steel, IP66
Dimensions

320mm x 260mm x 120mm

Height x Width x Depth

Indicators

LEDs: Mains Supply

Pump Active

High Water Alarm

High Oil Alarm

Pump Disable

 

LCD: Pump Operation Counter

Outputs

Mains Fail, High Water, High Oil, Pump Disable rated at;

10A at 230VAC (AC1)

0.1A at 220VDC (DC1)

Fixing Wall/Surface Mount via External Fixing Lugs
Sensor Unit
Power & Voltage Nominal
Construction Stainless Steel, Immersion Proof
Dimensions

570mm x 180mm x 70mm

Height x Width x Depth

Fixing Free Standing in Base of Sump
Pump
Power & Voltage 230 VAC (110 VAC optional)
Construction Stainless Steel
Dimensions

250mm x 160mm

Height x Width

Safety Thermal Trip; Self Reset
Flow Rate 110 litres per minute at 2-3 metre head
Fixing Part of the sensor unit

 

Andel PPL BundGuard - Automatic Oil & Water Separating Pump System
UK Time - GMT:

Andel PPL BundGuard - Automatic Oil & Water Separating Pump System
Andel PPL BundGuard - Automatic Oil & Water Separating Pump System

Heat Tracing - Thorne & Derrick