Andel Floodline Groundhog MKII Leak Detection System

Andel Floodline Groundhog MKII Leak Detection System

Self-Contained, Single Zone Floodline Leak Detection System

Andel's Floodline Groundhog MKII provides a standalone leak detection system for a single zone. The Groundhog MKII unit monitors for liquid leaks using Floodline Point Sensors and/or leak sensing cable connected to the unit and has flashing LED lights when a leak is detected or a system fault has occurred such as damage to the attached leak sensing cable or sensors.

The Floodline Groundhog MKII water leak detection unit can be connected to any control/building management system that has the facility to accept volt-free contacts.

Additional Floodline Point Sensors or Leak Detection Tape can be slaved off the Groundhog.

Floodline Groundhog MKII - Andel Water Leak Detection System Technical Specification
Function Water / Liquid Leak Detection
Zone Capacity 1
Power Multi-voltage operation 12 or 24V AC or DC at 0.8 Watts
Construction Built into a stainless steel Guard Plate which provides protection and assists fixing
Dimensions

Length - 130mm

Width - 90mm

Depth - 37mm

Fixing

Fixed or free standing on floor or in drip tray

Vertically at base of wall or plant

Monitoring

Leak - continuous water / liquid built-in sensor and aux sensor input

 

System Fault - aux sensor or leader cable damage, failure or disconnection

Alarm Indicator

Flashing LED's for Leak and System Fault

All alarms displayed separately and continuously until corrected and reset if in manual mode

Status Indicator Power LED
Controls

Manual/Auto reset select

Sensitivity setting

Outputs Leak/System Fault - SPCO relay (1Amp at 24VDC)

 

Andel Floodline Groundhog MKII Leak Detection System
UK Time - GMT:

Andel Floodline Groundhog MKII Leak Detection System
Andel Floodline Groundhog MKII Leak Detection System

Heat Tracing - Thorne & Derrick