48V Base Drum Heater - Low Voltage Base Drum Heater

48V Base Drum Heater - Low Voltage Base Drum Heater

T&D's low voltage base drum heaters provide an additional heating method for drum containers with a variable temperature control range of up to 90ºC with an output voltage of 48V.

The low voltage base drum heater is constructed from two metal plates with U shaped support brackets giving structural strength. The top plate of the unit has a low voltage carbon polymer heating pad attached to its underside directing even heat through the full area of the plate surface.

Insulation is contained between the back of the heating pad and the bottom plate of the LV base drum heater to ensure thermal efficiency.

The temperature of the base drum heater is fully adjustable between ambient and 90ºC. Low voltage base drum heaters can be used alongside heating jackets reduce thermal loss from under the drum and proving additional heat for demanding process conditions.

The base drum heater can be powered jointly with a low voltage drum heating jacket using one control unit with twin outputs or using a separate control unit.

48V Base Drum Heater - Low Voltage Base Drum Heater - Technical Specification
Part Ref TDFGS041
Plate Dimensions

585mm x 585mm x 30mm

Length x Width x Height

Power Output 290W
Mains Voltage 230V or 110V 50Hz
Transformer Type 1kVA; IP55 Enclosure
Transformer Output 12.5A ±1.25A at 48VAC
Heated Sections Circumference of drum
Temperature Control PID thermostat
Temperature / Current Protection Internal thermal fuse
Temperature Range Ambient to 90ºC
Construction Two metal plats with U section supporting brackets

 

48V Base Drum Heater - Low Voltage Base Drum Heater
48V Base Drum Heater - Low Voltage Base Drum Heater
48V Base Drum Heater - Low Voltage Base Drum Heater
UK Time - GMT:

48V Base Drum Heater - Low Voltage Base Drum Heater
48V Base Drum Heater - Low Voltage Base Drum Heater

Heat Tracing - Thorne & Derrick