Hazardous Area Air Warmers For Small Work Or Storage Areas

By Natalie Lundie on 14th October, 2013

Follow us on LinkedIn

Hazardous Area Air Warmers For Small Work Or Storage Areas

Hazardous Area Air Warmers - EXHEAT FWD

Hazardous Area Air Warmers For Use In Storage Or Small Work Areas

T&D offer a range of fhazardous area air warmers that are suitable for use in storage or small work areas.

EXHEAT FWD range of hazardous air warmers can be used where the flammable atmosphere is an IIA, IIB or IIC gas group and is located in zone 1 and 2 or zone 21 or 22 hazardous areas.

Typical applications include offshore installations, crane cabs, fuel servicing areas and aircraft hanger service bays.

FWD range of hazardous area air heaters can be floor or wall mounted and are suitable for ambient temperatures of -60ºC to 60ºC.

 Hazardous Area Air Warmer - EXHEAT Technical Specification

Power Output Rating Standard mild steel heater ratings and sizes are shown above, contact T&D for stainless steel units and other ratings to suit individual client requirements.
Enclosure Fabricated mild steel or stainless steel
Controls If required the heaters can be controlled using EXHEAT remote mounted thermostats
Mounting Pre-drilled support feet supplied as standard
Supply Voltage Single phase 230 / 254V or 110V
Certification ATEX certified EX II 2 G/D

IECEx & ATEX certified EX'd' IIC T2 to T4 Ex tD A21 IP66 T300ºC to T135ºC

EN/IEC60079-0, EN/IEC60079-1, EN/IEC61241-0 & EN/IEC61241-1

GOST-R (contact T&D for further information)
 

T&D are a master distributor and stockist for the EXHEAT range of hazardous area air warmers. Click the link below for more information on the FWD range of hazardous area air heaters or contact our sales team today to request a quote.

Hazardous Area Air Warmers For Small Work Or Storage Areas



Category:  EXHEAT

Go back to blog index


UK Time - GMT:


Heat Tracing - Thorne & Derrick