Exheat Industrial to Supply FP Flameproof Immersion Heaters to Bintulu LNG Project

By Terry McDonald on 15th April, 2014

Follow us on LinkedIn

Exheat Industrial to Supply FP Flameproof Immersion Heaters to Bintulu LNG Project

EXHEAT Industrial are to supply two oil separating FP hazardous area immersion heaters to the Bintulu LNG project. T&D are authorised distributors and stockist or the full EXHEAT industrial range including hazardous area fan heaters & air warmers, flameproof & industrial immersion heaters, hazardous area line heaters, water heaters & thermostat products.

EXHEAT Industrial's FP flameproof immersion heaters provide a direct heating solution for process liquids and gases which are non-corrosive to the materials the immersion heater is constructed from and are certified to meet the requirements of ATEX, IECEx, CSA, EN/IEC, CCOE, KGS and Ex CU TR (GOST). FP immersion heaters are certified for Zone 1, 2, 21 and 22 hazardous areas.

EXHEAT's FP rod immersion heaters have a mild steel or 316 stainless steel terminal enclosure with weatherproof protection to IP65, and are suitable for ambient temperatures from -60°C to +60°C. FP flameproof immersion heaters can be used for a number of applications such pre-heating oil or water, boiler equipment, frost protection and tank heating.

The Bintulu LNG project involves a mid-scale LNG plant located at Bintulu LNG complex in Sarawak. It has a capacity of 1,840-tonnes of LNG per day (67 million tonne/year) and is scheduled for start-up in October 2014.

Click here to request a quote or to contact us for further information.



Category:  EXHEAT

Go back to blog index


UK Time - GMT:


Heat Tracing - Thorne & Derrick