IBC HEATERS & IBC HEATING
IBC HEATERS & HEATING 110v
IBC HEATERS & HEATING 240v
IBC heaters and heating jackets are designed to provide electric surface heating to products stored in 1000 Litre Intermediate Bulk Containers (IBC's). The IBC heaters reduce viscosity of fats, oils, foodstuffs and chemicals and are in widespread service throughout the pharmaceutical, chemicals, cosmetic, food processing and manufacturing industries. IBC heater jackets are available with ATEX certification hazardous area use.
T&D offer ex stock heating jackets and also customised units to suit all heating jacket applications.
IBC Heaters - ATEX Certified IBC Heating Jacket
- Single Phase up to 240V 50/60Hz
- Current/Power Consumption 7A / 1800W
- When Run at 110V: 3.2A / 350W
- IP44
- Hazardous Area Certification II 2 G Ex e II T*
- *(dependant on voltages)
The IBC heating jacket is designed to fit around 1000L schutz type (plastic liner, metal frame) IBCs. The IBC heating jacket may also be used with 4 x 210L steel drums in a square configuration when sitting on a pallet.
The IBC heating jacket is suitable for heating of liquids and powders.
IBC Heaters - Heating Jackets for Intermediate Bulk Containers (IBC's)
IBC Heaters : Model Reference : HIBC/B
The HIBC/B insulated IBC heater jacket has a heating element stitched into an insulated heating jacket made from a water-resistant, teflon coated poyester, insulated with a layer of filament insulation.
The IBC heater jacket comes complete with release buckles for ease of installation and removal. The heating jacket has two separate heating circuits for its upper and lower halves; each circuit is controlled by an integral capillary thermostat for guaranteed IBC heating.
All IBC heaters and heater jackets are manufactured to conform to the
IBC Heater - Specification
IBC Heater Rating: 2 Circuits each 1000 Watts 110 or 240 Volts AC
IBC Heater Temp. Control: -5°C to +40°C or 20°C to 90°C Capillary Thermostat per Circuit
IBC Heater Performance: Water temp. from 15°C to 55°C in 56 hours (No Insulation Lid)
Water temp. from 15°C to 80°C in 56 hours (With Insulation Lid)
IBC Heaters - Silicone Heater Mats for Intermediate Bulk Containers (IBC's)
IBC Heaters : Model Reference : HIBC/A
HIBC/A is a silicone mat IBC heater for placement below the container liner before filling. An insulation heater jacket covering four sides and the IBC lid is also available to aid warm up time. Control of the IBC heater is via a 0° C to 90° C digital thermostat housed in an enclosure along with a RCD.
HIBC/B is an insulated nylon heater IBC jacket which covers all four sides of the IBC container and has an optional insulated lid.
IBC Heaters : Model Reference : HIBC/A
IBC Heater Rating: 2700 Watts 230 Volts AC
IBC Heater Temp. Control: 20°C-90°C Electronic Controller (Digital Readout)
IBC Heater Performance: Water temp. from 15°C to 70°C in 42 hours (No Insulation Jacket)
Water temp. from 15°C to 70°C in 30 hours (With Insulation Jacket)
The HIBC/A silicone heater IBC heater comprises of a high temperature resistance wire element laminated between silicone/ glass sheets.
A
